Új hozzászólás Aktív témák

• #1075 pegtop csendes tag

  Új Válasz 2008-06-18 18:01:52 #1075

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  pegtop

  csendes tag

  The firmware is available for Asus Wl500gP, g, gx, b, W and WLHDD!!!!!
  -Download http://koppel.cz/cdmawifi/download/169 (newest adapted, stable Oleg FW)
  -Set at routers web interface, system setup to factory default. (of course apply & finish)
  -Wait for reboot and click at menu system setup 'firmware upgrade' to upload your new firmware (1.69).
  -Please wait several minutes and do not touch/unplug anything.....
  THE LATEST FIRMWARE-RELEASE (1.69) SUPPORTS ALREADY THE HUAWEI E220 MODEM (SINCE 1.68).
  Click on GSM / GPRS and input your data of your isp - done.
  FOR ALL OLDER VERSIONS (<1.68) YOU NEED THE ATTACHED FILE 'dial.huawei.tar.gz' (or if your connection speed is too slow).
  -After reboot choose USB Connection and select User defined.
  -Upload attached user dial-up file 'dial.huawei.tar.gz'
  -Then USB connection, dial-up Config, your username / password / APN / dialin number. (some isp don't need usernames/passwords)
  Then apply and finish.

  After each reboot the router connects automatically to inet. Use the webif to toggle between connect and disconnect.
  Please note, that the modem must be switched with "windows mobile connect" to 3g preferred enabled and pin code disabled.
  If you don't have your dial-in number and/or APN, just google for it or call support line of your isp.

  With newer asus-routers (wl-500gp), perhaps you get a weak or no wireless signal. If this is the case, please log on (telnet) to your router (192.168.1.1) and add
  to your post-boot (stored at /tmp/local/sbin/post-boot) with 'vi /tmp/local/sbin/post-boot' (if you are not firm with vi, google for vi manual, it's easy):

  'wl antdiv 3'

  This allows the router to select the best antenna.

Új hozzászólás Aktív témák